The timed push-button basin tap can be installed on both porcelain and stainless steel washbasins. The tap is operated by pressing the push button. After the button is released, the water flow stops automatically according to the factory-set timing. The temperature of the discharged water can be adjusted using the mixing lever located on the side of the tap. Both a cold and hot water supply are required for the operation of the tap.
A 250-micron filter must be installed in the water supply system. The tap may only be operated with clean water of suitable hardness. Proper operation cannot be guaranteed when used with thermal water or water containing a high concentration of mineral salts, due to increased limescale formation.
A csaptelephez nem jár leeresztő; a mosdóhoz (bidéhez) külön kell választani. Színben illő megoldások a kínálatunkból:
Az időzített, nyomógombos mosdócsaptelep porcelán és rozsdamentes acél mosdókagylóra egyaránt felszerelhető. A csaptelep működtetése a nyomógomb megnyomásával történik. Az elengedést követően a gyárilag beállított időzítésnek megfelelően automatikusan elzár. A kifolyó víz hőmérsékletét a csaptelep oldalán található keverőkarral lehet szabályozni. A csaptelep működtetéséhez hideg és meleg víz biztosítása szükséges.
A vízhálózatba 250 mikronos szűrő beépítése szükséges! A csaptelep csak megfelelő keménységű, tiszta vízzel működtethető. Termálvizek, illetve magas ásványi só koncentrációjú vizek esetén a fokozott vízkőképződés miatt a helyes működés nem garantálható.
Cikkszám: AH3070451
English Description
Styron Basin Tap
The Styron Basin Tap is a single-lever faucet designed for both cold and hot water, ideal for use in sinks and basins. The robust construction and 40 mm ceramic cartridge ensure long-lasting performance. It features a two-screw faucet mounting for easy installation. The tap is equipped with an M24 anti-limescale aerator, which helps to provide an economical water flow. Additionally, the pull-rod drain system is integrated into the faucet body for easy operation.
Included with the tap are two 30 cm long, 3/8" M10 water supply hoses for convenient installation. The recommended water pressure for this faucet is between 1-5 bar, with a maximum temperature of 60°C.
The faucet comes with a 5-year warranty on the main body and 1-year warranty on wear parts.
Technical Data:
Height: 115 mm
Depth: 110 mm
Spout Reach: 55 mm
Weight: 0.81 kg
Manufacturer: Styron
Kedves, szakértő eladók, sok termék van kiállítva. 2023/04/06
Olvassa el vásárlóink véleményét Tekintse meg blogunkat