EN:
Plastik 32×5.4 mm Hot Water Pipe PN20 Weldable PPR (840010306)
This pipe is designed for hot water systems, with a PN20 pressure rating, available in 4-meter lengths. It is suitable for hot water supply systems (up to 80°C), drinking water systems, HVAC installations, irrigation systems, food industry piping systems, and thermal water systems. The minimum installation temperature is +5°C. Threaded connections should be sealed with Teflon tape, Teflon thread sealant, or sealant paste. Hemp sealing can only be used for fittings larger than 5/4″.
PP-R pipes are suitable for transporting any material that does not attack the pipe material. They are resistant to commonly used disinfectants in concentrations and exposure times typical for drinking water pipe disinfection. However, they are not resistant to prolonged exposure to concentrated petroleum products. The pH range of the transported medium can vary from 2 to 12, meaning it can handle both acidic and alkaline water. These pipes are resistant to rust.
Technical Data:
Technical Data | Value |
---|---|
Weight | 1.058 kg |
Manufacturer | Pestan |
Diameter | 32 mm |
Maximum Operating Pressure | 20 bar |
Length | 4 meters |
Maximum Temperature | 80°C |
Material | Polypropylene |
HU:
Plastik 32×5,4 mm Meleg Vízcső Pn20 Süthető PPR (840010306)
Ez a cső melegvíz rendszerekhez készült, PN20 nyomásosztályú, 4 méteres szálakban. Alkalmas melegvíz ellátásra (80°C-ig), ivóvíz rendszerekre, klímavezetékek szerelésére, öntözőrendszerek kiépítésére, élelmiszeripari csőrendszerekhez és termálvíz rendszerekhez. A minimális szerelési hőmérséklet +5°C. A menetes kötések tömítése teflon zsinórral, teflonszalaggal, vagy tömítő pasztával történjen. Kenderes tömítés csak az 5/4″-nál nagyobb idomoknál alkalmazható.
A PP-R csövek minden olyan anyag szállítására alkalmasak, amelyek nem támadják meg a cső anyagát. Ellenállnak az ivóvíz-vezetékek fertőtlenítésére használt szereknek, azonban nem ellenállóak a koncentrált kőolajipari termékek hosszú távú hatásaival szemben. A szállított közeg pH-értéke 2 és 12 között lehet, így mind savas, mind lúgos víz szállítására alkalmasak. A műanyag csövek nem rozsdásodnak.
Műszaki adatok:
Műszaki adat | Érték |
---|---|
Tömeg | 1,058 kg |
Gyártó | Pestan |
Átmérő | 32 mm |
Max. üzemi nyomás | 20 bar |
Hosszúság | 4 fm |
Max. hőmérséklet | 80°C |
Anyag | Polipropilén |
EN:
Plastik 32×5.4 mm Hot Water Pipe PN20 Weldable PPR (840010306)
This pipe is designed for hot water systems, with a PN20 pressure rating, available in 4-meter lengths. It is suitable for hot water supply systems (up to 80°C), drinking water systems, HVAC installations, irrigation systems, food industry piping systems, and thermal water systems. The minimum installation temperature is +5°C. Threaded connections should be sealed with Teflon tape, Teflon thread sealant, or sealant paste. Hemp sealing can only be used for fittings larger than 5/4″.
PP-R pipes are suitable for transporting any material that does not attack the pipe material. They are resistant to commonly used disinfectants in concentrations and exposure times typical for drinking water pipe disinfection. However, they are not resistant to prolonged exposure to concentrated petroleum products. The pH range of the transported medium can vary from 2 to 12, meaning it can handle both acidic and alkaline water. These pipes are resistant to rust.
Technical Data:
Technical Data | Value |
---|---|
Weight | 1.058 kg |
Manufacturer | Pestan |
Diameter | 32 mm |
Maximum Operating Pressure | 20 bar |
Length | 4 meters |
Maximum Temperature | 80°C |
Material | Polypropylene |
"Már a vásárlást megelőző információkkal maximálisan elégedettek voltunk. Ezt követően a kabin helyének kialakítása, a szállítás és beszerelés a megbeszélt időben, pontosan és zökkenőmentesen történt. Ami még rendkivül szimpatikus volt számunkra, hogy a munkák befejeztével rendben hagyták el a helyszint. Munkatársaik szakértelme és magatartása kiváló. Köszönjük! Üdvözlettel: Solti Péter és felesége 2017.08.28"
Mondja el véleményét